S-90

!!! New !!! the most firmest slat on the market

The S-90 external blind with guiding in guiding rails enables the smooth regulation of light intensity in the interior and at the same time shading up to 85% of the sun’s radiation, and thus preventing the interior overheating. The S-shape, 90 mm wide slat with rolled sealing ensures noise-free operation of the blind, and moreover it is able to pretty darken interiors. The external blind with S-slats is is the most firmest type of external blinds.

  • Advantages of external blinds S-90
  • external blind with the best shading results
  • smart shape of slat similar to roller blinds and doors
  • noise-free operation of the blind
  • high resistance of slat against damage by strong wind
  • 19 colour shades on stock

The advantages of external blinds Z-90 and C-80 are combined in the new external blind S-90. The new type of external blind S-90 achieves excelent shading results. When the slats S-90 are completely closed, then the shading result is the same as by external blind Z-90. The slats are provided with rubber insulation to avoid any noise of slats in the wind. Its new rounded shape of slat resembles the slat C-80, which is very popular among architects because of its elegant shape. It also increase protection of interior against sunshine.
The new S-shaped slats fit perfectly to the roller blinds not only if the S-shaped slats are in closed position. This character will be appreciated especially by those, who intend to install on the building external blinds, roller blinds and doors at the same time. Thanks to the design resemblance of roller blind and external blind S-90, the final view of building will be integrated.

The blind is controlled by a crank handle or electric motor. Greater convenience can be achieved by connecting to automatic sun/wind controls. Sealing in guiding parts also contributes to the silent operation of blinds. We offer guiding parts and the lower part either in elox or any colour according to the RAL colour swatch. The upper part is made of zinc-coated plate or aluminium. An aluminium cover plate can be used for covering the upper part and the raised bundle of slats, and is delivered in any colour according to the RAL colour swatch or in elox.

We offer slats in 19 colours, that are available on stock. Any other colour of slats is available upon request (profitable for orders with surfaces above 70 m2).
The external blinds with guiding in guiding rails are more resistant to strong wind and are less noisy than blinds with wire-guiding.

BASIC TECHNICAL PARAMETERS

  • Maximum width of blind: 400 cm
  • Maximum height of blind: 400 cm
  • Maximum width of connected blinds: 8 m (electric control)
Type of blind Min. width of blind Max. surface of blind
S-90 operation by crank handle 40 cm 9 m2
S-90 operation by motor 60 cm (55) 14 m2

CONNECTING BLINDS

It is possible to connect more blinds to one control. However, if the motor is placed in the middle of the assembly there, is a maximum of 3 blinds to one control.
The additional rule that there may be at most 5 bearings (revolving mechanisms) on each side of the motor must also be observed.

MATERIAL OF BLINDS

  • slats – aluminium, two-sided, colour-adjusted, rolled into a S-shape with rolled sealing profile;
  • width of slats: 90 mm
  • upper part – 56 x 58 mm of zinc-coated steel plate or extruded aluminium
  • lower part – extruded aluminium across width of slats
  • guiding parts – 20 x 20 mm of extruded aluminium
  • cover plate – bent 1.5 mm or 2 mm thick aluminium plate
  • fabric supports and strips – special synthetic fibres, grey or black
  • image description

    BE INSPIRED

    At LUXUZ DESIGN we specialise in customised window solutions where light and climate control are essential elements to the experience.

    more
  • image description

    GET A FREE QUOTE

    Want to know how much will it cost? We will help you to find out the exact cost by providing you a free quote, contact us now.

    more
  • image description

    SMS QUESTIONS

    Have any questions regarding to our products and services? Please contact Philip Soldat 0430 777 779. We will assist you right away!

    more
  • image description

    VISIT US

    Welcome to stop by our showroom, office and factory anytime. We are open from Mon to Thur 9~5pm,Fri 8~2pm, Sunday by app.

    more